7 Hills 3D Filament PA12, 1.75 mm, 1 kg (2.2 lbs), Natural

$76.75
Buy
Producer: #3D Filament 7hills

Color: Natural

Material Properties
Printing Properties
Submitted on 26 October 2016 CraftBot

Printing take

Technical parameters/specification
3d printer used:
CraftBot
Nozzle diameter (mm)
0.4mm
Layer thickness (mm)
0.2mm
Printing speed (mm/s)
20mm/s
Travel speed/rate (mm/s)
50mm/s
Retraction (mm/s)
50mm/s
Retraction distance (mm)
0.5mm/s
Extruder temperature (Co)
245
Platform temperature (Co)
60
Cooling (On/Off)
On
Platform type
Other
Brim (yes/no)
Yes
Raft (yes/no)
Yes
Adhesion enhancers used
Hairspray
Slicer used
CraftWare
Infill %
20
Number of shells
3
Visual evaluation
Photos of printed material
Evaluate the degree of part’s separation from printing platform 1- completely separated; 5- part did not get separated
Evaluate the part’s warp from the platform
Evaluate the degree of warp in other sections of the part 1- part does not match the blueprint; 5- warp was not observed
Quality of ship deck and bridge roof 1- surface is not closed, unsatisfactory; 5- perfectly closed surface
Quality of ship sides and bridge walls 1- surfaces are not even, unsatisfactory; 5- perfectly even surfaces
Quality of ship’s bottom surface –not taking into account warp 1 – surface is not closed, unsatisfactory; 5 – perfectly closed surface
Presence of unnecessary artifacts on the surface – hanging threads, artifacts, cavities 1 – many artifacts on the surface; 5 – perfectly clean surface – no artifacts
Round back window diameter measuring mm vertically
8.8
Number of threads in back window that have sagged loose approximate number
3
Overall quality of back window 1 – unsatisfactory; 5 – successful with minimum sagging threads
Front window height measuring mm vertically
9.1
Number of threads in front window that have sagged loose approximate number
5
Overall quality of front window 1 – unsatisfactory; 5 – successful with minimal sagging threads
Overall ship length
60.9
Overall quality of ship railing 1-unsatisfactory; 5 – successful
Overall ship height
47.7
Overall quality of box behind the cabin 1- unsatisfactory; 5 – successful
Chimney outside diameter
6.75
Chimney side straightness 1- not straight with significant curve; 5 – completely straight wall
Chimney overall quality 1- unsatisfactory; 5-successful
Roof overhang quality 1- unsatisfactory; 5-successful
Cylinder shape surface quality 1 – surface is not filled, unsatisfactory; 5 – surface completely filled
Inscription on nameplate at the back of the ship 1-inscription not readable, poorly parted ; 5 – inscription completely readable
Quality of the logo on the bottom surface of ship 1 – logo not clear and not recognizable; 5 logo successful and perfectly recognizable
Evaluation of overall print quality 1 – unsatisfactory; 5 – successful
Technical parameters/specification
3d printer used:
CraftBot
Nozzle diameter (mm)
0.4mm
Layer thickness (mm)
0.2mm
Printing speed (mm/s)
50mm/s
Travel speed/rate (mm/s)
50mm/s
Retraction (mm/s)
50mm/s
Retraction distance (mm)
0.5mm/s
Extruder temperature (Co)
245
Platform temperature (Co)
60
Cooling (On/Off)
On
Platform type
Other
Brim (yes/no)
Yes
Raft (yes/no)
Yes
Adhesion enhancers used
Hairspray
Slicer used
CraftWare
Infill %
20
Number of shells
3
Visual evaluation
Photos of printed material
Evaluate the degree of part’s separation from printing platform 1- completely separated; 5- part did not get separated
Evaluate the part’s warp from the platform
Evaluate the degree of warp in other sections of the part 1- part does not match the blueprint; 5- warp was not observed
Quality of ship deck and bridge roof 1- surface is not closed, unsatisfactory; 5- perfectly closed surface
Quality of ship sides and bridge walls 1- surfaces are not even, unsatisfactory; 5- perfectly even surfaces
Quality of ship’s bottom surface –not taking into account warp 1 – surface is not closed, unsatisfactory; 5 – perfectly closed surface
Presence of unnecessary artifacts on the surface – hanging threads, artifacts, cavities 1 – many artifacts on the surface; 5 – perfectly clean surface – no artifacts
Round back window diameter measuring mm vertically
8.6
Number of threads in back window that have sagged loose approximate number
5
Overall quality of back window 1 – unsatisfactory; 5 – successful with minimum sagging threads
Front window height measuring mm vertically
8.8
Number of threads in front window that have sagged loose approximate number
5
Overall quality of front window 1 – unsatisfactory; 5 – successful with minimal sagging threads
Overall ship length
59.6
Overall quality of ship railing 1-unsatisfactory; 5 – successful
Overall ship height
47.75
Overall quality of box behind the cabin 1- unsatisfactory; 5 – successful
Chimney outside diameter
6.8
Chimney side straightness 1- not straight with significant curve; 5 – completely straight wall
Chimney overall quality 1- unsatisfactory; 5-successful
Roof overhang quality 1- unsatisfactory; 5-successful
Cylinder shape surface quality 1 – surface is not filled, unsatisfactory; 5 – surface completely filled
Inscription on nameplate at the back of the ship 1-inscription not readable, poorly parted ; 5 – inscription completely readable
Quality of the logo on the bottom surface of ship 1 – logo not clear and not recognizable; 5 logo successful and perfectly recognizable
Evaluation of overall print quality 1 – unsatisfactory; 5 – successful
Evaluation of material characteristics
Please evaluate how was working with this material compared with other materials 1 - very hard, 5 – considerably easier
Which of the technical parameters had the biggest influence on material printing quality?
only the speed was being changed and it had no significant impact on the quality of the print.
To what extent printing speed influenced printing quality? 1- speed had considerable influence on quality; 5- speed had no influence on quality
Please name what you believe are the 3 most evident characteristics of this material tough, fragile, elastic, solid, soft, other – name them
transparentlittle bit elasticlightweight
Describe material smell during the printing process
nothing specific
Describe material surface characteristics by physically feeling and evaluating the part.
smooth, nice surface
How easy is this material to polish (with sandpaper, file or other)? 1- very hard, 5- easy
Please note what tool was used for polish test?
sandpaper
Can this material be glued? (Yes/No)
Yes
If yes, please note what sort of solvent, glue was used?
Notes
printing speed between 5 to 50mm/s didn`t influence quality at all

Leave a comment