BCN3D ABS Filament, 2.85 mm, 1 kg (2.2 lbs), Black

Print material overall rating

$19
Buy
See all test results See all pictures


Comments:

The material itself is really easy to use, because you can see the differences from settings perspective, because it is adjusting perfectly for every settings what i make them, but few times the material stuck in the extruder.

Color: Black

ABS (Acrylonitrile Butadiene Stryene) for 3D printers offers a high resistance with a good surface appearance and it has the better relation of quality/price. Requires adhesive coating despite working with a hotbed temperature of 70ºC. Using hair spray to stick it on the glass is highly recommended.

Material Properties
Printing Properties
Submitted on 19 May 2016 BCN3D Sigma

Printing take

Technical parameters/specification
3d printer used:
BCN3D Sigma
Nozzle diameter (mm)
0.4mm
Layer thickness (mm)
0.2mm
Printing speed (mm/s)
70mm/s
Travel speed/rate (mm/s)
120mm/s
Retraction (mm/s)
50mm/s
Retraction distance (mm)
1mm/s
Extruder temperature (Co)
245
Platform temperature (Co)
60
Cooling (On/Off)
On
Platform type
Blue tape
Brim (yes/no)
No
Raft (yes/no)
No
Adhesion enhancers used
None
Slicer used
Cura software
Infill %
Number of shells
Visual evaluation
Photos of printed material
Evaluate the degree of part’s separation from printing platform 1- completely separated; 5- part did not get separated
Evaluate the part’s warp from the platform
Evaluate the degree of warp in other sections of the part 1- part does not match the blueprint; 5- warp was not observed
Quality of ship deck and bridge roof 1- surface is not closed, unsatisfactory; 5- perfectly closed surface
Quality of ship sides and bridge walls 1- surfaces are not even, unsatisfactory; 5- perfectly even surfaces
Quality of ship’s bottom surface –not taking into account warp 1 – surface is not closed, unsatisfactory; 5 – perfectly closed surface
Presence of unnecessary artifacts on the surface – hanging threads, artifacts, cavities 1 – many artifacts on the surface; 5 – perfectly clean surface – no artifacts
Round back window diameter measuring mm vertically
8.3
Number of threads in back window that have sagged loose approximate number
0
Overall quality of back window 1 – unsatisfactory; 5 – successful with minimum sagging threads
Front window height measuring mm vertically
9
Number of threads in front window that have sagged loose approximate number
0
Overall quality of front window 1 – unsatisfactory; 5 – successful with minimal sagging threads
Overall ship length
60
Overall quality of ship railing 1-unsatisfactory; 5 – successful
Overall ship height
48.1
Overall quality of box behind the cabin 1- unsatisfactory; 5 – successful
Chimney outside diameter
6.6
Chimney side straightness 1- not straight with significant curve; 5 – completely straight wall
Chimney overall quality 1- unsatisfactory; 5-successful
Roof overhang quality 1- unsatisfactory; 5-successful
Cylinder shape surface quality 1 – surface is not filled, unsatisfactory; 5 – surface completely filled
Inscription on nameplate at the back of the ship 1-inscription not readable, poorly parted ; 5 – inscription completely readable
Quality of the logo on the bottom surface of ship 1 – logo not clear and not recognizable; 5 logo successful and perfectly recognizable
Evaluation of overall print quality 1 – unsatisfactory; 5 – successful
Technical parameters/specification
3d printer used:
BCN3D Sigma
Nozzle diameter (mm)
0.4mm
Layer thickness (mm)
0.2mm
Printing speed (mm/s)
50mm/s
Travel speed/rate (mm/s)
100mm/s
Retraction (mm/s)
50mm/s
Retraction distance (mm)
2mm/s
Extruder temperature (Co)
250
Platform temperature (Co)
110
Cooling (On/Off)
On
Platform type
Blue Tape
Brim (yes/no)
No
Raft (yes/no)
No
Adhesion enhancers used
None
Slicer used
Cura software
Infill %
Number of shells
Visual evaluation
Photos of printed material
Evaluate the degree of part’s separation from printing platform 1- completely separated; 5- part did not get separated
Evaluate the part’s warp from the platform
Evaluate the degree of warp in other sections of the part 1- part does not match the blueprint; 5- warp was not observed
Quality of ship deck and bridge roof 1- surface is not closed, unsatisfactory; 5- perfectly closed surface
Quality of ship sides and bridge walls 1- surfaces are not even, unsatisfactory; 5- perfectly even surfaces
Quality of ship’s bottom surface –not taking into account warp 1 – surface is not closed, unsatisfactory; 5 – perfectly closed surface
Presence of unnecessary artifacts on the surface – hanging threads, artifacts, cavities 1 – many artifacts on the surface; 5 – perfectly clean surface – no artifacts
Round back window diameter measuring mm vertically
8.84
Number of threads in back window that have sagged loose approximate number
0
Overall quality of back window 1 – unsatisfactory; 5 – successful with minimum sagging threads
Front window height measuring mm vertically
9.15
Number of threads in front window that have sagged loose approximate number
0
Overall quality of front window 1 – unsatisfactory; 5 – successful with minimal sagging threads
Overall ship length
59.60
Overall quality of ship railing 1-unsatisfactory; 5 – successful
Overall ship height
49.10
Overall quality of box behind the cabin 1- unsatisfactory; 5 – successful
Chimney outside diameter
6.97
Chimney side straightness 1- not straight with significant curve; 5 – completely straight wall
Chimney overall quality 1- unsatisfactory; 5-successful
Roof overhang quality 1- unsatisfactory; 5-successful
Cylinder shape surface quality 1 – surface is not filled, unsatisfactory; 5 – surface completely filled
Inscription on nameplate at the back of the ship 1-inscription not readable, poorly parted ; 5 – inscription completely readable
Quality of the logo on the bottom surface of ship 1 – logo not clear and not recognizable; 5 logo successful and perfectly recognizable
Evaluation of overall print quality 1 – unsatisfactory; 5 – successful
Technical parameters/specification
3d printer used:
BCN3D Sigma
Nozzle diameter (mm)
0.4mm
Layer thickness (mm)
0.2mm
Printing speed (mm/s)
40mm/s
Travel speed/rate (mm/s)
90mm/s
Retraction (mm/s)
50mm/s
Retraction distance (mm)
1.5mm/s
Extruder temperature (Co)
245
Platform temperature (Co)
90
Cooling (On/Off)
On
Platform type
Blue tape
Brim (yes/no)
No
Raft (yes/no)
No
Adhesion enhancers used
None
Slicer used
Cura Software
Infill %
Number of shells
Visual evaluation
Photos of printed material
Evaluate the degree of part’s separation from printing platform 1- completely separated; 5- part did not get separated
Evaluate the part’s warp from the platform
Evaluate the degree of warp in other sections of the part 1- part does not match the blueprint; 5- warp was not observed
Quality of ship deck and bridge roof 1- surface is not closed, unsatisfactory; 5- perfectly closed surface
Quality of ship sides and bridge walls 1- surfaces are not even, unsatisfactory; 5- perfectly even surfaces
Quality of ship’s bottom surface –not taking into account warp 1 – surface is not closed, unsatisfactory; 5 – perfectly closed surface
Presence of unnecessary artifacts on the surface – hanging threads, artifacts, cavities 1 – many artifacts on the surface; 5 – perfectly clean surface – no artifacts
Round back window diameter measuring mm vertically
8.84
Number of threads in back window that have sagged loose approximate number
0
Overall quality of back window 1 – unsatisfactory; 5 – successful with minimum sagging threads
Front window height measuring mm vertically
9.5
Number of threads in front window that have sagged loose approximate number
0
Overall quality of front window 1 – unsatisfactory; 5 – successful with minimal sagging threads
Overall ship length
61.12
Overall quality of ship railing 1-unsatisfactory; 5 – successful
Overall ship height
48.24
Overall quality of box behind the cabin 1- unsatisfactory; 5 – successful
Chimney outside diameter
7.03
Chimney side straightness 1- not straight with significant curve; 5 – completely straight wall
Chimney overall quality 1- unsatisfactory; 5-successful
Roof overhang quality 1- unsatisfactory; 5-successful
Cylinder shape surface quality 1 – surface is not filled, unsatisfactory; 5 – surface completely filled
Inscription on nameplate at the back of the ship 1-inscription not readable, poorly parted ; 5 – inscription completely readable
Quality of the logo on the bottom surface of ship 1 – logo not clear and not recognizable; 5 logo successful and perfectly recognizable
Evaluation of overall print quality 1 – unsatisfactory; 5 – successful
Evaluation of material characteristics
Please evaluate how was working with this material compared with other materials 1 - very hard, 5 – considerably easier
Which of the technical parameters had the biggest influence on material printing quality?
Printing speed
To what extent printing speed influenced printing quality? 1- speed had considerable influence on quality; 5- speed had no influence on quality
Please name what you believe are the 3 most evident characteristics of this material tough, fragile, elastic, solid, soft, other – name them
Smooth, solid, tough.
Describe material smell during the printing process
There were no smell during the process.
Describe material surface characteristics by physically feeling and evaluating the part.
The material is smooth and if it has some spikes during the print, the sharpness of them is less than with other materials.
How easy is this material to polish (with sandpaper, file or other)? 1- very hard, 5- easy
Please note what tool was used for polish test?
Sanpaper
Can this material be glued? (Yes/No)
No
If yes, please note what sort of solvent, glue was used?
Notes
The material itself is really easy to use, because you can see the differences from settings perspective, because it is adjusting perfectly for every settings what i make them, but few times the material stuck in the extruder.

Leave a comment